Migrating From Incogniton to JustBrowser: Exporting Profiles and Re-Binding Proxies

11 min read

Moving a team's browser profiles from one multi-account browser to another goes wrong in a predictable way. Someone forgets to write down a proxy setting, exports cookies from a session that had already expired, or rebuilds a profile with a different timezone, and the next sign-in comes from a location that does not match the account's history. The site asks for extra verification, and a Monday morning goes on recovery codes.

The fix is boring: document first, export while logged in, rebuild with matching settings, check each profile, and migrate in order of importance. The Incogniton-to-JustBrowser path is one of the cleaner ones, because Incogniton can export cookies and a profile's settings are easy to write down.

This guide covers the exact workflow, for accounts your team owns or manages with permission.

What You'll Have at the End

Working profiles in JustBrowser with cookies intact, proxies bound, and each profile checked for consistency before anyone relies on it. Session state carries over. Nothing is migrated blind.

This is not a 5-minute job. Budget 15-20 minutes per important profile, less if you batch the simple ones.

Prerequisites

  • Incogniton installed with the profiles you are migrating
  • JustBrowser downloaded. The 7-day trial is full access with unlimited profiles, so you can test the whole workflow (card required, and you are not charged if you cancel inside the seven days)
  • A cookie export extension. Cookie-Editor or a similar extension works fine
  • Proxy credentials documented: host, port, username and password for each profile
  • 60-90 minutes for your first batch of 3-5 profiles

JustBrowser is one plan at $9.99/month or $99.99/year, with unlimited profiles, so there is nothing to size up before you start.

Step 1: Document Your Incogniton Setup First

Skip this and you will regret it. A proxy config that is wrong by one digit in the port number is enough to break a profile, and you will not know which setting was the culprit if you did not write them down.

Open Incogniton. For each profile you are moving, note:

ProfileUsed forProxy HostPortTimezoneOSLast Active
STORE-01Marketplace seller accountus.smartproxy.com10001America/ChicagoWindows 112026-06-24
CLIENT-ADS-MAINClient ad account (with permission)isp.iproyal.com32000America/New_YorkmacOS2026-06-25
QA-PROFILETest pages185.xxx.xxx.xxx8080Europe/LondonWindows 102026-06-20

Why does this matter? A site's security checks treat a sign-in from an unfamiliar location as a possible account takeover, and ask for extra verification. Keeping the IP, timezone and language the same across the move is the single most useful thing you can do to avoid needless prompts on your own accounts, and when a site does ask, complete its verification normally.

Get the proxy config right. Everything else is recoverable.

Step 2: Export Cookies From Incogniton

Incogniton has a built-in cookie export option. The extension method gives more control.

Method A: Browser extension

  1. Launch the Incogniton profile
  2. Navigate to the site the profile is used for
  3. Confirm you are logged in. Stale sessions export useless cookies.
  4. Open the extension, choose Export, and pick JSON or Netscape format
  5. Save as store-01-cookies.json

Method B: Incogniton's export

  1. Find the cookie export option in Incogniton's profile menu (its help pages show where it sits in your version)
  2. Export the profile's cookies
  3. You get a JSON file

The extension method exports per site, which is cleaner when one profile handles several services. A bulk export grabs everything, including a lot of tracking cookies from ad networks that you do not need.

Critical: Export while actively logged in. Server-side sessions expire, and a cookie file from last month may point at a session that no longer exists.

Step 3: Create Matching Profiles in JustBrowser

Open JustBrowser and create a new profile. Now pay attention.

Settings that should match:

  • Operating system: Windows 11 in Incogniton, Windows 11 in JustBrowser.
  • Timezone: Match the proxy location. A Chicago proxy means America/Chicago.
  • Language: Match the proxy country. A US proxy means en-US, a German proxy means de-DE.
  • Screen resolution: Match what the old profile used, for example 1920x1080.

Settings that will differ (and that is fine):

  • Graphics rendering output, because different engines render differently
  • Graphics card renderer string
  • Audio output

Those values are generated by each tool's engine, and browsers change them with updates all the time. Focus on the settings you can document.

Proxy configuration:

Enter your existing proxy credentials: same host, same port, same auth. Use JustBrowser's built-in proxy tester. If the country or IP differs from what you expect, stop and debug before continuing. Check every field twice.

Step 4: Import Cookies and Verify the Session

In JustBrowser's profile settings, find cookie import. Paste the JSON or upload the Netscape file.

Launch the profile, open the service and check: are you logged in?

Logged in? Move on to the consistency check.

Logged out? Common causes:

Session expired server-side

The cookie file was valid when exported but the session has since ended. Log in again from the JustBrowser profile. With the same IP and timezone as before, one fresh sign-in is normal.

Cookie format mismatch

Some exports include metadata that breaks import. Strip the file to the essential fields: name, value, domain, path, expiration.

Domain mismatch

Cookies for .amazon.com do not apply to amazon.co.uk. Make sure the domains match.

Signing in again is not a disaster. What matters is doing it from the right IP and timezone.

Step 5: Check Each Profile Before You Rely On It

Do not skip this. Before anyone uses a migrated profile on an account that matters:

  1. Launch the profile in JustBrowser
  2. Open JustBrowser's browser checker, which grades whether WebRTC candidates agree with your public IP and whether the IP's UTC offset agrees with the browser's timezone
  3. Open BrowserLeaks and look at the IP, WebRTC and timezone pages
  4. Run the check twice. The same values both times means the profile is stable

Not every value on those pages matters equally; 5 things everyone gets wrong about multi-account browsers is a useful primer on what these checks can and can't tell you.

What you are looking for:

  • Timezone vs proxy location: these must agree. This is the most common mismatch.
  • Language vs proxy country: should agree.
  • WebRTC: the profile's WebRTC should not expose your real IP.
  • Stability: the same profile should show the same values on every launch.

If something is off, check timezone against proxy location first, then language, then operating system. Those three account for most inconsistencies.

Step 6: Move Over Gradually

Start with profiles that matter but are not critical: test accounts and lower-stakes profiles where an extra verification prompt would not hurt.

Run them in JustBrowser for a full week and watch for:

  • More verification prompts than before
  • Session instability or unexpected sign-outs
  • Pages that render differently

No issues after a week? Migrate the rest. Problems? Debug them first. Do not move the account your business depends on until the rest are stable.

Avoid changing several things at once, such as proxy, device and workflow in the same afternoon, so that if something goes wrong you know which change caused it. If any account you're moving is brand new, our guide to new account limits and checks by platform explains what each platform limits early on.

Common Errors and Fixes

Proxy connection fails in JustBrowser

Cause: Credentials are wrong, or the provider requires IP whitelisting.

Fix: Double-check every field. Some providers (Bright Data, IPRoyal, Smartproxy) require you to whitelist your machine's IP. If you are migrating from a different computer than you used with Incogniton, add the new machine's IP to your provider's allowlist.

The checker shows a timezone or WebRTC mismatch

Cause: Profile settings do not match the proxy location.

Fix: Set the timezone to the proxy's timezone and the language to the proxy country's language. Keep the operating system consistent with the profile's earlier setup. Disable browser extensions during testing, since some modify browser APIs.

Session keeps logging out after migration

Cause: Cookie domain mismatch, or the server-side session expired.

Fix: Sign in again from the JustBrowser profile and keep the IP and timezone the same as before. Have 2FA recovery codes ready, since some services ask for verification on a new browser.

Profile runs slower than in Incogniton

Cause: Usually proxy latency, not the browser.

Fix: Test proxy speed independently with a speed test site. Also check whether you are running too many profiles on underpowered hardware, since every active profile is a full browser process. Check the proxy first.

The Pricing Math

JustBrowser is $9.99/month for unlimited profiles, or $99.99/year if you pay annually. The 7-day trial includes unlimited profiles, so you can test the workflow before committing. Team seats are free: a teammate can run the profiles you share with them, though they cannot create or sync their own.

To compare, look at what you currently pay on Incogniton's own pricing page; plans change, so read it directly rather than relying on a figure in a blog post. Run both tools in parallel while migrating, and cancel the old one once your important profiles have been stable in JustBrowser for at least two weeks.

Next Steps

Once your test profiles run cleanly for a week:

  1. Batch migrate the remaining profiles. It gets faster with practice, especially for the simple ones.
  2. Share profiles with the right teammates. Sharing carries view-only or launch permission, which is cleaner than passing logins around.
  3. Configure automation. If you use Playwright or Puppeteer, our guide to collecting public data at scale covers programmatic profile control.

For click quality on ad accounts during this transition, ClickzProtect monitors for invalid clicks. For conversion tracking on your own sites without cookies, JustAnalytics is privacy-first analytics.

There is no drag-and-drop import that just works. But if you write down the proxy configuration first and move the least critical profiles first, the migration is routine.

Frequently Asked Questions

Will switching from Incogniton to JustBrowser sign my team out of its accounts?

Not if you carry the cookies across and keep the proxy, timezone and language the same. Many sites ask for extra verification when a sign-in comes from a new location or looks different from the last one, so change as little as possible during the move. The usual causes of a sign-out are a different proxy provider, a timezone that does not match the proxy, or cookies that were not exported while logged in.

Can I directly export Incogniton profiles into JustBrowser?

No direct profile transfer exists between multi-account browsers. You export cookies with a browser extension or Incogniton's export feature, document your proxy credentials, then create new profiles in JustBrowser with matching OS, timezone and language settings. Budget 15-20 minutes per profile for important accounts.

What happens to browsing history after migration?

Session cookies carry login state, but browsing history does not transfer between tools. The migrated profile starts with the cookies you imported and builds its own history as your team uses it, the same way a new browser installation does.

Should I wait until my Incogniton subscription expires before switching?

Run both in parallel while you migrate. JustBrowser is $9.99/month or $99.99/year for unlimited profiles, with free team seats; compare that with what your current plan costs on Incogniton's own pricing page. Cancel whichever tool you are leaving once your key profiles have been stable for a couple of weeks.


Try JustBrowser

A multi-account browser for teams, built on a custom Chromium engine with native C++ integration, not an extension. Each profile keeps its own cookies, storage, proxy and 40+ browser settings, and teammates can share profiles. REST API for Playwright, Puppeteer, Selenium. 7-day free trial, card required — then $9.99/month or $99.99/year, unlimited profiles, free team seats.

Get started → · How it differs from Multilogin / GoLogin / AdsPower

Tags
  • incogniton-migration
  • multi-account-browser
  • profile-export
  • proxy-configuration
  • profile-validation
  • buildinpublic
  • saasstudio
  • aiworkforce
  • buildwithclaude

Ready to manage multiple accounts?

Seven days free, then $9.99/month — one plan, everything included.

We'd like to use Google Analytics, a Google service, to understand how our website is used. It sets two cookies in your browser and runs only if you click Accept. You can change your choice at any time with Cookie settings. Cookie Policy

Sign-in cookies and the cookie that remembers this choice are always on; the website needs them to work.

Google Analytics, a Google service, helps us understand how our website is used. It sets two cookies, _ga and _ga_TVZHQ99TZW. It is now onoff in this browser. If your browser sends a Global Privacy Control or Do Not Track signal, it stays off. Cookie Policy